This step is for you to set up the doors you want to control from the Gogogate2 system. You must set up at least one door (of a máximum of 3).

Please fill the following fields:

1.CONFIGURE DOOR 1: settings to configure DOOR 1.

2. ENABLE: select YES to control a door.

3. DOOR MODE: Select the type of sensor used in your door:

• GARAGE: use this feature for garage doors and gates. The output will be active for 1 second.
• PULSE: use this feature for blinds. The output will be active while you are pressing the button on the application.
• ON/OFF: Use this feature to turn on and off devices.

4. SENSOR TYPE: select the type of sensor:

• WIRELESS: select this option if you have a model wireless sensor GGG2-TWS.
• WIRED: select this option if you have a wired sensor model GGG2-WDS. If you do not have a sensor select WIRED SENSOR.

5. DOOR NAME: name of the door

6. ENABLE: select YES if you want to configure a second door. Select NO if don't want to use it.

7. ENABLE: select YES if you want to configure a third door. Select NO if don't want to use it.