In this step we are going to set up the different doors that Gogogate2 will control. You must configure at least one door (maximum 3 doors).

Please fill in the following fields:

1. DEVICE NAME: name to identify your device. This parameter can not be changed afterwards.

2. ENABLE: Click on the checkbox to control the selected door.

3. DOOR MODE: select how you will operate the door:

• GARAGE: Use this feature for garage doors and gates. The output will be active for 1 second.
• PULSE: use this feature to type controls blinds. The output will be active while you are pressing the button on the application.
• ON/OFF: Use this feature to turn on and off devices.

4. SENSOR TYPE: the type of sensor. If the door is operated without sensor select SENSOR WIRED.

• WIRELESS: Select this option if you have a wireless sensor model GGG2-TWS.
• WIRED: Select this option if you have a wired sensor model GGG2-WDS.

5. DOOR NAME: Name of the door you want to control

6. SENSOR ID: Enter the ID of the wireless sensor located on the sensor label. This field only appears if you select WIRELESS on the type of sensor.

7. ENABLE: Click on the checkbox to control a second door.

8. ENABLE: Click on the checkbox to control a third door.